ABSTRACT
Abstract To compare the shaping ability of different single-file systems in the preparation of mesial curved canals of mandibular molars using micro-CT technology. Fifteen mesial roots of mandibular molars with two independent and curved canals (n = 30) were selected, scanned at a resolution of 26.7 μm anatomically matched, and distributed into three groups (n = 10), according to the preparation system: WaveOne 25.08, Reciproc 25.08, and OneShape 25.06. A final micro-CT scanning was performed, data sets were registered with their respective counterparts, and compared regarding the three-dimensional (volume, surface area, and structure model index - SMI) and two-dimensional (perimeter, area, roundness, major and minor diameters) parameters, as well as, canal transportation, using ANOVA and post hoc Tukey tests (α = 5%). Overall, no difference was observed between groups regarding area, perimeter, volume, surface area, and canal transportation (p > 0.05). Within group, no canal transportation was significantly higherobserved in the apical third (0.10 ± 0.05 mm) compared to coronal (0.08±0.040 mm) and middle (0.07 ± 0.03 mm) thirds (p < 0.05). Structure model index (SMI) was statistically higher after preparation with OneShape instrument (0.36 ± 0.26) compared to other systems (p < 0.05). Within the parameters of this study, similar shaping ability was observed in the preparation of mesial curved root canals of mandibular molars with Reciproc, OneShape and WaveOne systems.
Subject(s)
Humans , Root Canal Preparation/instrumentation , Dental Pulp Cavity/anatomy & histology , Dental Pulp Cavity/diagnostic imaging , Reference Values , Materials Testing , Analysis of Variance , Statistics, Nonparametric , Dental Instruments , Equipment Design , X-Ray Microtomography/methods , Molar/anatomy & histologyABSTRACT
Abstract Objective: To evaluate the effect of ultrasonic and sonic activation on physicochemical properties of AH Plus, MTA Fillapex, ADSeal, GuttaFlow Bioseal, and GuttaFlow 2 sealers. Methodology: Three experimental groups were formed: no activation (NA), ultrasonic activation (UA), and sonic activation (SA). The sealers were manipulated according to the manufacturers' instructions. A 3-mL syringe was adapted to receive 1 mL of sealer. Activation was performed with a 20/.01 ultrasonic insert (20 s/1W) in the UA group. A size 35.04 sonic tip was used (20 s/10,000 cycles/min-1) in the SA group. The molds for physicochemical analysis were filled and evaluated according to ANSI/ADA specification no. 57: setting time (ST), flow (FL), dimensional change (DC), solubility (SB), and radiopacity (RD). Statistical analysis was performed by Kruskal-Wallis, one-way ANOVA, and Tukey's tests (P<0.05). Results: Regarding ST, only AH Plus and GuttaFlow 2 in the NA group met the ANSI/ADA standards. All FL values were greater than 20 mm in diameter, as determined by ANSI/ADA. The tested sealers and protocols did not comply with the ANSI/ADA standards for DC. As for SB, only MTA Fillapex, regardless of the activation protocol, did not follow the ANSI/ADA standards. All of the investigated sealers, regardless of the activation protocol, presented radiographic density higher than 3 mm Al, as proposed by ANSI/ADA. Conclusions: UA and SA promoted changes in the physicochemical properties of the evaluated root canal sealers, mainly in ST and F. Thus, it is important to evaluate the physicochemical properties of endodontic sealers associated with activation techniques prior to clinical application in order to determine whether the properties follow the parameters set by ANSI/ADA, ensuring safety and quality of root canal filling.
Subject(s)
Oxides/chemistry , Root Canal Filling Materials/chemistry , Silicates/chemistry , Calcium Compounds/chemistry , Aluminum Compounds/chemistry , Dimethylpolysiloxanes/chemistry , Epoxy Resins/chemistry , Ultrasonic Waves , Gutta-Percha/chemistry , Reference Values , Solubility , Surface Properties , Time Factors , Materials Testing , Reproducibility of Results , Analysis of Variance , Statistics, Nonparametric , Drug CombinationsABSTRACT
Abstract This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.
Subject(s)
Humans , Dental Bonding/methods , Dentin/drug effects , Edetic Acid/chemistry , Resin Cements/chemistry , Sodium Hypochlorite/chemistry , Tooth Root/drug effects , Acid Etching, Dental/methods , Analysis of Variance , Dental Restoration Failure , Dentin/radiation effects , Hardness Tests , Materials Testing , Microscopy, Confocal , Post and Core Technique , Random Allocation , Reference Values , Reproducibility of Results , Root Canal Irrigants/chemistry , Root Canal Preparation/methods , Statistics, Nonparametric , Surface Properties/drug effects , Tooth Root/radiation effects , Ultrasonic TherapyABSTRACT
Introduction and Objective: Dens invaginatus, a developmental malformation resulting from the invagination of enamel, has been associated with increased prevalence of pulpal and periapical diseases. Case report:This anomaly is classified according to the severity (types I-III). Management of type III dens invaginatus is complex and an endodontic challenge. This case report describes the management of the endodontic retreatment type III dens invaginatus in a maxillary lateral incisor. Conclusion: Nonsurgical treatment can be effective to treat type III dens invaginatus. CBCT is an important diagnostic tool that allowed the management of such case.
ABSTRACT
Introduction and Objective: The aim of this study was two-fold: 1) to evaluate, in vitro, the shear bond strength of two sealers by push-out test and 2) to assess the failures after displacement. Additionally, the formation of tags was observed by SEM. Material and methods: Forty mandibular premolars were selected and the canals were subjected to biomechanical preparation with rotary instruments. These specimens were divided into two groups according to the sealer (n = 20): GI - MTA Fillapex and GII - AH Plus. All roots were filled with sealer only, without gutta-percha. After a period corresponding to three times the setting time of the sealer, the roots were sectioned transversely into slices of 1 mm thickness, to obtain one slice from the cervical third, to be used in the push-out test. Following, two slices of each group were randomly chosen for ultrastructural analysis by scanning electron microscopy (SEM). The data obtained in shear bond strength test were subjected to statistical analysis. Results: AH Plus cement exhibited higher shear bond strength values (1.332±0.75 MPa) than MTA Fillapex (0.071±0.07 MPa), with statistically significant differences. Conclusion: MTA Fillapex has a low bond strength with less formation of tags than AH Plus.
ABSTRACT
Introduction: The endoperiodontal lesion occurs when a tooth undergoing endodontic disease is united to a periodontal lesion with apical progression. Many times, the differential diagnosis between the endodontic and periodontal disease can be of difficult execution and the correct diagnosis and planing of the treatment is of main importance for a good prognosis. Objective: To identify the main microorganisms within the lesion of endodontic and periodontal origin and correlate them with the endoperiodontal lesion. Literature review: The search strategy comprised the electronic studies of databases such as PubMed and Cochrane on the microbiology of the endodontic and periodontal systems through employing the following keywords: microbiology, endodontics, periodontal pocket. Results: There were similarities in the endodontic and periodontal microflora. However, the number of microorganisms within the cross infection is limited, including Bacteroides, Eubacteria, Fusobacteria, spirochaetes, Wolinella. The bacterias forming the red complex are closely related to the severity of the periodontal disease and can also participate in the pathogenesis of the periradicular abscesses. Conclusion: There are many communication routes between the periodontium and pulpal tissue, therefore the contamination from um tissue to another can occur, existing a microbiological inter-relationship between these tissues.
ABSTRACT
This paper describes and discusses the multidisciplinary treatment involving a permanent maxillary lateral incisor fused to a supernumerary tooth, both presenting pulp necrosis and periapical lesion. A 15-year-old male patient sought treatment complaining of pain, swelling and mobility on the maxillary right lateral incisor. After clinical and radiographic examination, root canal preparation was performed according to the crown-down technique and a calcium hydroxide dressing was placed for 15 days. The patient returned and the definitive endodontic filling was done with thermomechanical compaction of gutta-percha and sealer. After 18 months, clinical and radiographic examinations were carried out and no pain or swelling was reported. Two years after endodontic treatment, the patient returned for periodontal and cosmetic treatments. Nine months later, a cone-beam computed tomography (CBCT) revealed that the previously detected periodontal defect and periapical lesion were persistent. Apical endodontic surgery was indicated. The supernumerary tooth was removed, the communicating distal surface was filled and the surgical site received bioactive glass and demineralized bovine organic bone. The pathological tissue was submitted to histopathological examination and the diagnosis was periapical cyst. One year after the apical endodontic surgery, CBCT showed bone formation at maxillary lateral incisor apical area. Two years after the surgery, the restoration was replaced due to aesthetic reasons and periapical radiograph showed success after 5 years of treatment. A correct diagnosis and establishment of an adequate treatment plan resulted in a successful management of the case.
Este caso descreve o tratamento multidisciplinar de um incisivo lateral superior permanente fusionado a um dente supranumerário, ambos apresentando necrose pulpar e lesão periapical. Paciente compareceu ao consultório se queixando de dor, edema e mobilidade do incisivo lateral superior. O preparo endodôntico foi realizado no sentido coroa-ápice e foi colocada pasta de hidróxido de cálcio como medicação intra-canal por 15 dias. A seguir, a obturação foi realizada pela termoplastificação da guta-percha. Após 18 meses, foram realizados exames clínicos e radiográficos indicando ausência de dor e edema. Dois anos após o tratamento endodôntico, o paciente retornou para o tratamento periodontal e estético. Nove meses depois, foi realizada tomografia computadorizada e observou-se presença de defeito periodontal e lesão periapical. Foi então indicada e planejada a cirurgia paraendodôntica. O dente supranumerário foi removido e a área de comunicação com o canal radicular do incisivo lateral foi preenchida; a loja cirúrgica foi preenchida com vidro bioativo e osso orgânico bovino desmineralizado. O tecido patológico da lesão periapical foi submetido à análise histopatológica sendo diagnosticado como cisto periapical. Um ano após a cirurgia parendodôntica, uma nova tomografia computadorizada mostrou neoformação óssea na região periapical do dente em questão. Doi anos após a cirurgia, a restauração foi trocada devido à motivos estéticos e uma radiografia periapical mostrou sucesso do tratamento (5 anos após o tratamento inicial). Um correto diagnóstico e plano de tratamento multidisciplinar é essencial para o sucesso do tratamento de dentes fusionados à dentes supranumerários.